Printed perfectly and came out great. A friend originally saw a set of “three wise” dragons and asked if I could print monkeys instead. These were exactly what he was looking for, and the print quality and details are excellent. I didn’t get a photo of them before giving them to my friend, but he was very happy with how they turned out. He now wants a base for them to stand on and a custom name added for his club that’s based on the three wise monkeys, so this print is officially pushing me to start learning Fusion 360. Thanks for a great model.

All three profiles (Santa, reindeer/Rudolph, and the sleigh) printed extremely well for me. I ran full plates of Santas and reindeer with no issues, and the details came out clean and consistent across all of them. I made most of the reindeer as Rudolph but also printed a few with black noses, and both versions look great. I paired Santa and Rudolph together as gifts for friends and family, and printed a few sleighs for special family members to complete the set. Everything printed smoothly and the final results look great on display.

I just tried the Honeycomb PETG profile with a 0.6 mm nozzle, and it’s a total game changer. I’m now able to print a shelf in under 3.5 hours on my A1, and I got about 8.5 shelves out of a single spool. That efficiency is fantastic and finally let me get back to finishing all the shelves I need. Thank you very much for this!

Really appreciate that this is a multi-color reindeer that doesn’t require an AMS. Not having to use my AMS Lite let me use six colors instead of being limited to four, and I didn’t have to waste a lot of filament on color changes. All of the pieces fit together nicely overall, though the pupil pieces were a bit tight on my print and stick out slightly. Very cute model. Thank you for designing and sharing this!

I needed a flyer stand for my club and really liked this design. I needed it to fit Letter size paper, so I scaled the width to hold an 8.5-inch sheet. Since I have an AMS Lite on my A1, I also added my club’s name in the tag area. I forgot to turn on supports, so the text didn’t come out perfect, but the stand itself printed great. I may reprint it if the club wants more. Thanks for the nice design!

A friend asked me to print him a set of platonic solids because the ones someone made for him previously weren’t all symmetrical. I used this model and created two versions: one set scaled so all edges are the same length, and another set scaled so all shapes share the same overall height. Hope he likes them! Great design, and thanks for sharing!

Printed two fried chicken legs in coffee and brown. I tried scaling them to look right in the KFC bucket, but I didn’t quite nail the ratio. My wife wanted them for a joke related to a work project, so I printed a few different fried-chicken pieces. Since it was just for a joke, I didn’t bother reprinting. Still a fun model. Thanks for sharing!

Printed perfectly and really does look like a hot wing. My wife wanted it for a joke related to a work project, so I printed a few different fried-chicken pieces, and this one ended up being our favorite. In the photo, the wing is shown in front of the bucket rather than by itself. Great model, and thanks for sharing!

My son wanted a cute turkey for Thanksgiving and picked this one. He specifically wanted the keychain size with the hidden feet. Since the AMS wastes a bit of filamen, I printed several at once. I probably should have used a larger brim-object gap, because removing the brim was tougher than expected. Overall, they printed great and look adorable. Thanks for sharing this fun design!

I scaled the bucket up so I could use it as a bucket for some 3D-printed chicken pieces. My wife wanted it for a joke related to a work project. The bucket came out perfect: smooth walls, crisp details, and the two parts fit together flawlessly with no tweaking needed. Fantastic design, and thanks for sharing it!

When I came across the barber business card holder, I knew I had to print it for the lady who’s been cutting my hair for the last twenty years. It printed great, and she absolutely loves it! (I blurred out her info in the photo, of course.) Thanks for sharing such a fun and thoughtful design!

Really love this photo holder that looks like a Polaroid OneStep camera. It is such a fun design! Since I’m using an AMS Lite, I colored the shutter button red in Bambu Studio. Because I can only print four colors at a time, I split the middle stripe into two pieces: one with the red and orange stripes, and the other with the yellow, green, and blue. After printing, I just glued them together. I also colored the lens silver for some extra detail. Very fun print and it turned out great!

I had never heard of a Hobson’s Joint until I came across this design, and once I saw it, I just had to print it. Everything printed perfectly! It does take me turning both revolvers for the links to move, so I’m not sure what might be causing that. I printed one of the links in a different color to make it easier to watch the motion. Really neat design! Thanks!

Printed the adorable Hear No Evil, See No Evil, and Speak No Evil dragon trio and they came out great! I originally printed them for my wife, since she loves dragons (and wasn’t thrilled with the dragon skeleton I printed earlier 😅). On the first try, two of the dragons’ tree supports broke during printing. My A1 doesn’t seem to like tree supports, so I reprinted them using normal snug supports and reduced the print speed to 50%. The results were perfect! My wife loves them, and my son loved them so much I had to print another set in purple silk for him. Thanks for such a cute and well-designed set!

Printed the 500% brick-style Skeleton, which came out great! I also printed the ghost cover, and everything fits perfectly together. My sons love it! I really appreciate all of HeiHei’s Maxi Figure designs, they’re always fun and print beautifully. Thank you for sharing!

Printed the 500% brick-style Ghost (happy version) in green glow-in-the-dark filament. Looks awesome over the 500% skeleton! The fit was spot-on, and it really pops under low light. My sons love the glow effect. As always, HeiHei’s designs are fantastic. Thank you for creating and sharing these Maxi Figures, much appreciated!

Printed the 500% brick-style figure dressed as a skeleton, along with the Jack-o’-lantern head and candy buckets. They all turned out great! The pumpkin head swaps perfectly between figures, and the buckets are a fun touch. I rotated the legs slightly to reduce filament changes, which worked perfectly. My sons absolutely love this set, and I do too! HeiHei’s Maxi Figure designs are consistently amazing. Thank you for sharing them!

Perfect little functional print! 🧰🔩 I printed the Mini Clamp Keychain and absolutely love the design. All the pieces fit together perfectly, though the support was a bit tough to remove from one of the slots. I made several in different colors, even did one with a black top clamp and a gray screw, which looks great! These work surprisingly well and are much stronger than a C-clamp I printed earlier from a different designer. Awesome design, thanks for sharing!

Absolutely love these desiccant containers and all the different variations. They print perfectly, the pieces fit together so well, and the hygrometers snap right into place. After sealing one of my rolls, the humidity dropped to 10%! Really well-designed. Thank you very much!

Printed in place perfectly and works great! A really fun little fidget toy. Thanks for sharing the design!