Many popular Bitaxe prints are inefficient, so I designed a new adapter to improve airflow to the heatsink and added venting to direct air onto the VR copper heatsinks. This dropped temps by ~10 °C. With a single Noctua A6x25 fan, I can push 2 TH/s while keeping the ASIC near 60 °C and VR under 80 °C. Rear airflow is still recommended to keep VR below 70 °C.

The stock light on the Bambu A1 is very dim and doesn't do a whole lot. They now come with an LED Lamp Kit that can be very handy to fix this issue. I made a mount so that you can use this LED Lamp and brighten up your 3d prints! It pushes into the arm for the cutter for an easy install and removal.

I made my own very simple yet effective Bitaxe Gamma 601 screen mount to prevent it from breaking. My reason for making this was other models I tried either broke themselves or they used too much plastic for such a simple piece. This can print in under 2 minutes and will be more than strong enough.