I made mine with 7 wall loops, 8 top and bottom shell layers to make it 400ish pounds rated and made it bigger. everything uniform scaled for the P1S. left piece 199.25 mm, right piece (screw stool) 223.18 mm and I took the cup out of the left piece and gave it its own plate with z axis at 26.70mm. the lid screws on but after the long print time 2 days and 10 hours and 12 minutes, I’m cautious. I love the design but since this is my largest print so far and I’m using my full weight the plastic sound of bracing is worrisome but it feels solid but I would not recommend standing on it unless you have something underneath the screw stool to hold it in place and don’t even try with the full stool you’ll probably fall but I love how it looks even with me running out of filament it took 2377.76 grams to make this thing. iPad Pro 11 inch for comparison. Just sit on it and don’t do any crazy movements and you should be fine. I will definitely update if anything happens.

TPU wasn’t 100% dry but it still came out good I had it on 50C for over 5 hours and it still came out and works perfectly head shaking, jumping and running and all.