Fab ! Works as intended.

prints great ! lid is tight, but I knew that before I printed. boosted.

super useful!

Another fantastic design by you, sir!

Brilliant ! so funny, great for Easter :) :) :)

Printed great (together with another file from the author, Ruined Towers). Will be using for ruins in Clank! Legacy :) Thanks

Printed well, thanks !

Thanks for the model ! Have only printed rings so far, player boards next. I used Sunlu PLA+, so for me rings were slightly loose for the coasters. I reduced the size to 72.8mm for X and Y and it fits PERFECTLY!

Changed sparse filling to adaptive cubic to be under 200g, as the filament (Sunlo PLA+ 2.0) was running out. Printed brilliantly!

Fantastic! Finally it takes me under 5 mins to clean the filter. So happy 🤣🤣🤣

Designer did an amazing work creating the tokens! I scaled up the thickness to 3mm, increased the infill to 95% (with lightning pattern) and tinkered a bit with colours/ layers to reduce the number of filament changes. Printed on smooth PEI plate. I experimented with 0.16 layers and with ironing, but for the increased print time it wasn’t worth it for me. I might try to use normal iron and parchment paper to get the tops extra smooth (not that it’s really needed) Again - thanks for the brilliant design!

prints well, prints fast ! thanks !

great insert! i found that with the thin “alea” branded “insert” the fit was maybe 0.5 mm too tight, so I removed it.

Great print. Fits into the original insert with no visible lift. Makes it so much easier to keep tiles in place! thanks!

Awesome print! a bit of “spilover” on the plate, but quickly cut with an exacto knife

Fits a Sunlu spool perfectly. Thanks !