I initially tried printing from Bambu Handy and just changing the colors of everything except the eyes to the same color thinking the slicer would automatically forgo the color change but what stated about a 9 hour print (presumably for the H2C turned into 20 hours) so I'm assuming that's what it would be with a ton of purge/poop waste if I decided to test out my two AMS 2 Pro setup with a P2S to the fullest but that would be for another time. I really liked this chicken design and my sister in law has chickens so I finally setup Bambu Studio and combined all objects as one except the eyes so that I could use my Rainbow Filament and it turned out great! only took 2.6 hours to print and 47g versus the planned 236g and 20.2 hours. I still want to print the full rainbow Chicken but maybe another day when I'm not still learning. Still a very cool concept for those with the mult nozzle system.

I'm not blaming the diffusers but I wanted to try and print in ABS due to high temps in the printer especially when the heat bed is 100°C and right next to the top closest to the exhaust outlets. unfortunately I kept getting deflection near the end of the print so eventually pulled it up in Bambu Studio to add a brim though I did so incorrectly via mouse ears as I'm still learning. Letting the chamber heat up more helped and increasing heat bed temp to 110°C got my best adhesion with a clean plate and 3DLAC with ASA but I'm still trying to dial it in. That said I'm not blaming this design but at least it's been great for testing it lol. I have gotten good enough prints though to put one on both the auxiliary fan and optional left auxiliary fan and confirm they perfectly redirect air.

Wife made for friend and super glued studs to for earrings. Came out super fantastic!

Came out perfect! Had to do a little filing from the support connections which is expected from letting it sit. My wife wanted to make this for a friend that's visiting and loves cows. Expect plenty of poop if you go the AMS route but that's okay and expected.

By far the best solution for mounting the 4-in-1 PTFE Adapter for the P2S. I have two AMS 2 Pro units and a AMS HT connected. Printed with Sunlu PLA and cut 3cm of PTFE as recommended.

Super Cute, gifted my wife a 3D printer for Christmas and this is what she wanted to print first and gave the turtle for our son to play with.