Just wanted to provide an update: I’ve released the Sunlu profiles to my testing group via Discord, and the results so far have been very positive. I’ve made a few tweaks along the way, but we’re definitely moving in the right direction toward getting everything relisted for download. You can follow my MakerWorld posts for updates, and if you’d like to help test profiles before they go live, you’re welcome to join my Discord. #Sunlu Filament #Sunlu #JJJonesJr33(Edited)

Hi all. I am facing an issue: printing a face, haha. I am using P1S, with Sunlu PETG white, to print a head, which I cut into 4 parts. The top 1/4 of the prints are getting rough, like blistering. The total height is about 61mm, and the issue starts around 45 mm. I had it all calibrated according to the P1S standards, and the filament prints fairly well on less organic features. Despite being PETG, I am sure it is not due to moisture. The environment is kept at 30%, the AMS is under 20%, and the storage containers I use for all my filaments are at 10%. At first, I thought it could be due to overheating, so I kept the door open for the second plate, but I had similar results. The affected area is also where the print profile is transitioning from a vertical to a horizontal wall. Could it be an overflow issue? How do we check and fix this kind of issue? #Problem #Printing Issue #Sunlu filament