Dimensions for a 250x250mm bed
If for any reason it doesn't fit on your bed, you can resize the model to the size you want from your slicer.
It consists of two parts, the lamp body (body.3mf) and the rear cover (lid.3mf). Sometimes I include two lids, with and without a hole (choose the one you want, I recommend printing the Lid with hole whenever possible, to be able to remove the LED cable).
You can also use it as earrings or a necklace! Resize it in Bambu Studio (or whatever slicer you use) to adjust to the size you want, and turn this keychain into gorgeous little earrings or a necklace!
Print only one of the following “Lid” files:
- Lid with hole.3mf : Recommended for most cases. To avoid printer/filament tolerance issues, this version is the most recommended, although you will need glue to hold the cap on as it is purposely made loose.
- v2_Lid tight fitting, 1 hole ⭐ : My favorite, printed on Bambu P1S, fits in without problems. It has a tight fit, so you won't need glue. In addition, the hole allows cables up to 5mm and you do not need to desolder the cable or cut it, it actually has a slot more than a hole.
- v2_Lid tight fitting, 2 holes : Also a tight fit like the previous one. The difference here is that it has 2 holes (12.5mm and another 5mm) in case you wanted to use an on/off switch.
----
You will need:
Optional, but recommended :
----
Assembly instructions:
You can check this amazing video from braga3dprint and follow the assembly instructions: https://www.youtube.com/watch?v=QNsShLmXYh0
His default profile settings are working great for lamps: