C3PO 1 by Starchaser09

Starchaser09

Generative 3D Model>Hueforge & Lithophane

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.08mm layer, 1 walls, 100% infill

Designer

2.2 h

1 plate

4.3(3)

0.08mm layer, 1 walls, 100% infill

Designer

11.7 h

8 plates

0.08mm layer, 1 walls, 100% infill

Designer

3.6 h

8 plates

A1 Mini Profile slightly downscaled

1.6 h

1 plate

Boost

121

189

252

Released

Description

I've added a second Print Profile of the original model which is approx. 26 inches X 12 inches

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x225mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2mm and the Actual Depth is 1.8mm

Filaments Used:
PETG Creality Black Transmission Distance:
PETG Tpoimns Gray Transmission Distance:
PETG Creality White Transmission Distance:
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Gray
At layer #16 (1.36mm) swap to White for the rest.

star wars

c3po

hueforge

Comment & Rating (12)

@redheadedstrang

Boosted

10/10! Printed it on my a1 mini, so I made a profile I hope that is alright coach! This is seriously such a cool print and im not even a real big star wars fan! Im super curious if it would look okay if we swapped white for a cheap yellow. By cheap I mean the sorta almost see through kind so it would work well for shading.. thatd be kinda cool to see, I might try it sometime just to see.. If I ever do ill post the results! *Edit, I dont know why, but on PC Im unable to rate the print? o.O

(Edited)

The designer has replied

@user_3376781559

Thanks for trying to rate it! I'm not sure if you actually need to make a print profile for the A1 mini or not since they can be adjusted in size but not height but thanks for doing it anyhow! I was also thinking of adding either a gold or orange color to the print.. Not sure how it would work out. In case you missed it I did create a much larger print of this, 26" x 12" Print profile #2 with 8 plates. might be to big for the a1 mini?

(Edited)