Rotating Heart Keyrings v1 by DanTup

DanTup

Art>Coin & Badges

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.12mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

4.4(11)

0.12mm layer, 2 walls, 15% infill

20 min

1 plate

4.0(5)

Boost

Released

Description

Update: I have published a redesigned version of this model that may be less likely to come apart and where the middle part will spin more freely: https://makerworld.com/en/models/479274#profileId-390597

A small heart keyring with rotating inner sections.

Comment & Rating (27)

@Kyleee

Print Profile

0.12mm layer, 2 walls, 15% infill

Looks great! Nice model :)

(Edited)

The designer has replied

@DanTup

Thank you!

@pab1o90

Print Profile

0.12mm layer, 2 walls, 15% infill

Perfect!

@Jmkastl10

Print Profile

0.12mm layer, 2 walls, 15% infill

super cute!! so just tried something small because it’s been so long since using my printer and it went great. no errors and no mess up’s. i love it!!!

@finsfidgets

Print Profile

0.12mm layer, 2 walls, 15% infill

Strength Issue:the middle peice breaks very easily but it is still a good fidget.

The designer has replied

@DanTup

I've published a slight redesign at https://makerworld.com/en/models/479274#profileId-390597 that should be less likely to break or bind up in the middle. Feedback appreciated!

@Imgoodbeingme23

Print Profile

0.12mm layer, 2 walls, 15% infill

50/50 success. not all spin freely. might be different pla.

The designer has replied

@DanTup

Due to the shape of the heart, it was hard to make the inside heart spin very freely without risking it coming loose (or the pegs that hold it easily breaking). It should loosen up with a bit of wiggling/rotating, but the goal was just that it can rotate and not so much that it would spin freely. I have published my previous version without the innermost heart which does spin very well if you'd like something that spins better: https://makerworld.com/en/models/471717#profileId-381389

(Edited)

@DanTup

I've published a slight redesign at https://makerworld.com/en/models/479274#profileId-390597 that should be less likely to break or bind up in the middle. Feedback appreciated!

@Imgoodbeingme23

Replying to @DanTup :

Awesome!

@Firefly10

Print Profile

0.12mm layer, 2 walls, 15% infill

printed great. These would be amazing if not for the fact the middle heart keeps falling out on every model I printed. There needs to be something either side of the top and bottom of the heart to stop them falling out as I've had to glue them parts. if you do that I am happy to change my review.

@DanTup

This model was a bit sensitive to differences in filament.. some would be loose and fall out, and others would be difficult to turn. I posted a new version at https://makerworld.com/en/models/479274 that should work much better (it can't fall out, and the inner heart should spin much better). Please try it out and let me know if it's better :-)

@user_2164330379

Print Profile

0.12mm layer, 2 walls, 15% infill

hearts in the center breaks gonna check if it's on my end

@DanTup

@DenDom

Print Profile

0.12mm layer, 2 walls, 15% infill

inside heart fell out

The designer has replied

@DanTup

It turns out this model was bit sensitive to differences in filament. I published an updated model that should be more consistent with different filaments - see the description on this model for a link to it.

@GuildStudio

Print Profile

0.12mm layer, 2 walls, 15% infill

(Edited)

The designer has replied

@DanTup

I published a resigned version of this as a remix - link also in the description. It should work better and be less variable across filaments. Please try it out and let me know if you have issues with it, thanks!

@GuildStudio

I’ll give the remix a try and let you know.

@GuildStudio

My fault (well the printers’ fault). The part cooling fan wasn’t working.

(Edited)