Darth Vader with Red Lightsaber
Darth Vader with Red Lightsaber
Print Profile(1)
Description
Tired of having your prints turn out noting like the posted “photo”? Then you've come to the right spot, I only post photos of the actual print and not the file they were generated from.
If you have a request, want FREE*Patreon exclusive* models(like the ones below), or if you are interested in members only models and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D
Instructions
Can be rescaled just remember not to change the Z axis.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
I also put a single layer of black under my red, I think it makes the red look deeper and move vibrant, But it is not required.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Overture Red Transmission Distance: 8.2
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Space Gray
At layer #18 (1.52mm) swap to White
At layer #22 (1.84mm) swap to Black
At layer #23 (1.92mm) swap to Red for the rest.
Comment & Rating (39)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
