A1 Mini Top Bowden mount
Copyright Claim
A1 Mini Top Bowden mount
Boost
46
121
21
GIF
Print Profile(2)
V3.1 ___ 0.16mm layer, 2 walls, 15% infill
Designer
42 min
1 plate
Optimal Profile, 0.16mm layer, 2 walls, 15% gyroid infill
32 min
1 plate
Boost
46
121
21
2
108
76
Released
Description
Updated version 3.1 online.
Print speed 50%
Prevents the filament from tangling on the A1 mini when Z is moving.
Comment & Rating (21)
All
Print Profile
V3.1 ___ 0.16mm layer, 2 walls, 15% infill
Erfüllt seine Funktion bestens. Top.
The designer has replied
1
Reply
Vielen Dank für das Teilen deines Ergebnis.
0
Reply
Print Profile
V3.1 ___ 0.16mm layer, 2 walls, 15% infill
v3.1 is definitely an upgrade. Holds the ptfe connector well. everything stays put even when you run the X all the way to the cutter. Nice job!
The designer has replied
1
Reply
Thanks :)
0
Reply
Print Profile
V3.1 ___ 0.16mm layer, 2 walls, 15% infill
Used it in combination with an external spool holder (https://makerworld.com/en/models/134485#profileId-145948) but with an almost empty spool the holder would move and get pulled up because it wasn’t heavy enough.
to overcome the issue I’ve used your Top PTFE mount and connected a PTFE tube between the holder and the connector.
since the ptfe-connector doesn’t move anymore like it did when it was attached to the z-axis everything stays in the same place!
thanks!
0
Reply
Print Profile
V3.1 ___ 0.16mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
Nice work. I like the color :)
0
Reply
Print Profile
V3.0 ___LEGAZY_ 0.2mm layer, 2 walls, 15% infill
using the profile to print, the guide wouldn't stay locked in when the extruder goes to cut. Just a loose fit. going to try slicing it myself to see if I get a better result.
The designer has replied
2
Reply
A advanced version is just around the corner
(Edited)
1
Reply
Replying to @matz3e
awesome! can't wait. I hate the stock placement for a multitude of reasons. Any chance you'll be adding holes in the top to be able to bolt it to the extruded aluminum z rail? either way. Will be printing your next ver.
0
Reply
Replying to @Toprharley
Version 3.1 is online. Have fun!
(Edited)1
Reply
The part that is in line with the z-axis rail seems to be a bit too large. It is possible to move the z-axis high up such that the cap pops off (if no screw attached) or the head just bangs into the cap. Other than that, the design is ok
(Edited)The designer has replied
1
Reply
Thanks for your Feedback.
Since the cap has the exact same size as the orginal its not a issue of the design.
I did not move the Z that high, but also there shout be a machine limit because the z ends at the cap.
0
Reply
Print Profile
V3.0 ___LEGAZY_ 0.2mm layer, 2 walls, 15% infill
worked perfectly! game changer and i'm no longer getting failed prints!
The designer has replied
1
Reply
Thanks. This should be the default mount for non AMS A1 printers!
0
Reply
Is there a way to unmount bowden from its place without broke it? Thanks
The designer has replied
1
Reply
yes but depending on your printer and detail profile be careful or push from inside.
0
Reply
Boosted
Print Profile
V3.1 ___ 0.16mm layer, 2 walls, 15% infill
1
Reply
Print Profile
V3.0 ___LEGAZY_ 0.2mm layer, 2 walls, 15% infill
1
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld