This is a minimalist magsafe charging station. It works both on portrait or landscape orientation.
You can choose between 3 design available :
Magsafe stand + Magsafe base Magsafe stand + Samsung wireless base Magsafe stand You can also choose between the logo or no logo magsafe cover stand :
Miscellaneous:
Magsafe stand + Magsafe base 2 * Magsafe charger 13 * M3 brass insert 13 * M3x8 countersunk screw Magsafe stand + Samsung wireless base 1 * Magsafe charger 1 * Samsung wireless charger 9 * M3 brass insert 9 * M3x8 countersunk screw Magsafe stand 1 * Magsafe charger 9 * M3 brass insert 9 * M3x8 countersunk screw Assembling:
The assembly is pretty straighforward, here are some tips:
Make sure to run your cable through the arm and base before screwing them together Make sur to leave enough slack before screwing the magsafe stand cover You should run the stand cable first before the base cable Do not overtighten the magsafe stand cover screw as the front face is very thin Use vhb tape to fix the base on your desk Print settings:
PLA or PETG Layer height : 0.2 mm No support (except on the base as shown below) Print orientation :