Medium Crystal Dragon Display Stand by Jeff Smith

Jeff Smith

Tools>Organizers

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

14.2 h

3 plates

5.0(3)

Boost

Released

Description

This is a stand for displaying what I call a medium crystal dragon (designed with Cinderwing3d dragons in mind but will likely work for others). I print at 80% and call them “medium”.

The piece that holds the dragons will work with the base, connectors, rods, etc. from my full-size (100%) dragon stand: Crystal Dragon Display Stand by Jeff Smith - MakerWorld they are interchangeable. Fully loaded, this will hold ~16 dragons, but that's pretty packed. The space for the dragons is ~36mm.

Comment & Rating (9)

@8BitTitan

Boosted

Thank you for making it compatible with the parts from the other stand so I don’t have to redo everything! i’m trying to rate the print profile but it’s not letting me. Maybe because I opened it up on desktop… I’ll check there.

(Edited)

The designer has replied

@JeffSmith

You're welcome! Hope it works out well for you!

@JeffSmith

Btw. your gyro dragons are very cool :)

@8BitTitan

Boosted

Replying to @JeffSmith :

Thanks! I couldn’t rate it so I used a boost token instead 😂

@zrowfks

Print Profile

0.2mm layer, 2 walls, 15% infill

The rack is good but very wobbly. A quick fix would be to Gloop glue it together but I need to be able to break it down so I can put in a bin with the dragons.

The designer has replied

@JeffSmith

Hi, shouldn't be very wobbly, use one myself. There can be variation in print, but you can just scale up the rods slightly if they are not fitting snugly. Another option so you can break it down and it's more rigid is to put one or two wraps around the edge that goes into the connectors of electrical tape.

(Edited)