Hello everyone,
the plant pot cover in wood design is here.
If you like the model, I would appreciate it if you could take the time to like, follow, or boost it. That helps me continue to create great models for you. Thank you very much in advance.
This serves to beautify any pots. With the parameters 100mm in height and 100mm in width, it is easily scalable for any pots, as seen in the last photo. The measurements refer to the pot to be inserted.
The plant cover comes in 2 variants. They differ only in the size of the wood look. In addition, there is a plant coaster included to catch excess water. Disposal of the water is easy. Lift the cover and pour out the water, and you're done. Don't forget to factor this in if you've adjusted the size.
If you should have liability issues, use some adhesive like glue stick or 3D lack or brim.
If you have any wishes, don't hesitate to look and simply ask.
For more designs check out my !!!COLLECTION!!!
If you like my work and want to support me you can buy me a coffee HERE
If you have any special requirements and need it personalized: just hit me up, I´ll try my best to design it for you.
Happy printing!