HUEFORGE CALIBRATION SWATCH - FILAMENT SAMPLE
Copyright Claim
HUEFORGE CALIBRATION SWATCH - FILAMENT SAMPLE
Boost
40
91
10
Print Profile(4)
Single SAMPLE - 0.08mm layer, 2 walls, 100% infill
Designer
14 min
1 plate
NO AMS - 0.08mm layer, 2 walls, 100% infill
Designer
12 min
1 plate
SWATCH DISPLAY BOARD - 0.2mm layer, 4 walls, 25% infill
Designer
1 h
1 plate
Print by object - 0.08mm layer, 2 walls, 100% infill
Designer
30 min
1 plate
Boost
40
91
10
2
76
30
Released
Description
I've made a swatch that can be used to calibrate the Transmission distance of any filament in HUEFORGE.
I also included the BambuLab swatch display board, as seen in the picture, for your convenience.
Hope this will help you having success with Hueforge.
Step to calibrate:
- Printe the calibration swatch with a base color and the color you want to calibrate.
- Upload the stl file in hueforge.
- Select the base color and set it to 1.04mm depth
- Select color to calibrate and set it up to the rest of the model.
- Compare the actuel swatch print with the Hueforge preview.
- Adjust the Transmission Distance in Hueforge until you match the printed sample.
Comment & Rating (10)
All
A question, what is the difference if you calibrate with black or white base?
The designer has replied
0
Reply
The white base allow you to calibrate black and dark color. It is also usefull if you want to play a bit deeper with hueforge and start reversing the color order (lite color first and darker on the top)
0
Reply
Replying to @JSDESING
I see, so could be useful for some color pop situations too. Thanks!
0
Reply
Print Profile
Single SAMPLE - 0.08mm layer, 2 walls, 100% infill
perfect!
0
Reply
Print Profile
SWATCH DISPLAY BOARD - 0.2mm layer, 4 walls, 25% infill
0
Reply
Print Profile
Single SAMPLE - 0.08mm layer, 2 walls, 100% infill
0
Reply
Boosted
Print Profile
SWATCH DISPLAY BOARD - 0.2mm layer, 4 walls, 25% infill
0
Reply
Boosted
Print Profile
NO AMS - 0.08mm layer, 2 walls, 100% infill
0
Reply
Print Profile
Print by object - 0.08mm layer, 2 walls, 100% infill
0
Reply
Print Profile
NO AMS - 0.08mm layer, 2 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld