The second model in my watch stand series. Like my other designs, I tried to incorporate an “industrial” theme into these stands. They look especially good with G-SHOCK branded watches however I'm sure they will suit others. Incorporated are optional strap tensioners for those with large wrists/ straps. Simply tighten or loosen the M3 screws to adjust the tensioner. These stands look great with the optional M3 countersunk washers, however button head screws will work just fine on their own if you prefer.

Assembly Tip

Print at 25% gyroid infill for a good level of strength.

Add a little glue to the guide notches on cradle part B. This will help prevent the cradles from moving when removing/ displaying your watches.

Screws required to complete:

4 M3x14mm countersunk or button head screws to attach the watch cradles to the center connector.

2 M3x10mm countersunk or button head screws to attach the center connector to the backplate.

2 M3x12mm countersunk or button head screws to attach the backplate to the base.

2 M3x10mm countersunk or button head screws to lock cradle parts A and B together.

2 M3x8mm screws for the optional Strap tensioners.

* These are recommended, you may get away with slightly longer or shorter screws depending on the stand parts.