AMS Lite Vertical Handle
Copyright Claim
AMS Lite Vertical Handle
Boost
77
157
35
Print Profile(1)
0.2mm layer, 4 walls, 25% infill
Designer
3.1 h
1 plate
Boost
77
157
35
3
183
104
Released
Description
presenting the AMS Lite Vertical Handle
No support needed, just a brim
This model is designed to handle the AMS lite in vertical position.
If you need the horizontal version, get it here: https://makerworld.com/en/models/171708#profileId-188504
Comment & Rating (35)
All
turned out good. i downloaded the raw file and sliced it with.2 "strong" profile having 6 walls, but reduced to 8% honeycomb infill. I used BL PETG BASIC white. I also used tree auto supports for the underside of the handle and screw holes. then i added my nickname in slightly raised .1mm. I smoother out with adaptive variable layer height. once it was done I cleaned up the edges using deburing tool.
thank you
(Edited)
The designer has replied
0
Reply
looks great!
0
Reply
Replying to @G3DS
thanks! it's been really handy. i move my ams around all the time and this has been very helpful.
0
Reply
Replying to @BennyBoots
check this out: It may be very useful for your application, an additional handle on top for less awkward position of wrist when lifting the AMS lite:
https://makerworld.com/en/models/242538#profileId-258640
(Edited)1
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
Printed in PETG.
The designer has replied
0
Reply
thats a handsome looking dark gray! what petg brand is it?
0
Reply
Replying to @G3DS
Sunlu Gray
0
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
this is a very nicely designed handle. I printed it in PETG with no other setting changes and it came out very good except for two areas. the overhang under the handle needs some tweaking to clean up stringing and the bottom corner at the build plate needs support. otherwise it's a very strong and well fitting piece. thanks for sharing this!
1
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
worked good
0
Reply
printed this one in BL PETG BASIC BLUE. It's gorgeous. I added my nickname to the handle 😄👍😎. this blue one is going on my 2nd AMS lite. I've already added your handles to my first AMS lite. these work great! thanks
0
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
Very Awesome!
0
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
Tolle Kombination zusammen mit dem vertikalen Ständer. Danke
0
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
Great fit and very usable. I take printer to work often and this makes life easier
0
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
Thank you!
0
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld