Utility XS - case by sipura

sipura

Tools>Medical Tools

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

1st 0.2mm layer, 2 walls, 13% infill

Designer

4.2 h

3 plates

5.0(58)

0.2mm layer, 2 walls, 13% infill

Designer

4.2 h

3 plates

5.0(22)

3rd optional inner container

Designer

56 min

1 plate

5.0(3)

Boost

404

672

128

889

1.1 k

Released

Description

Hello,

So far we have made 3 different boxes on the same theme.

Well, this is our 4th, which is intended for pills.

In the utility case there is also an additional inner cointainer with a separate lid, so that you can take out the pills individually for each day.

Also, we have another model that has a different inner cointainer, so you have a choice that suits you better.

Simple and easy print like other ones.

All parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.

To assemble it, you need:

3pcs M3 nuts

1pcs of screws M3x30mm

2pcs of screws M3x20mm

I hope you like it, and enjoy printing and using this useful case.

I expect your pictures of printed models in the comments :D

Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.

Enjoy printing :D

Comment & Rating (128)

@TNTMoore

Print Profile

0.2mm layer, 2 walls, 13% infill

Very cool! excellent profile and and it loved this Neon green filament I used. I think I’ll gift this one to a friend, and build a few more with the other options!

The designer has replied

@sipura

Great, thank you for sharing a photos with us :D

(Edited)

@TNTMoore

Replying to @sipura :

You’re welcome! ☺️

@hawk_ml

Print Profile

1st 0.2mm layer, 2 walls, 13% infill

I still need to print the gasket piece, but it printed great and fits perfectly. I used M3x16 instead for the hinges so they wouldn't stick out as much.

The designer has replied

@sipura

Nice, I am glad you like it :)

@Matt148

Boosted

added some basic cylinders to hold my ND filters, works great! printed in petg

The designer has replied

@sipura

nice :)

@iPollo

Print Profile

0.2mm layer, 2 walls, 13% infill

Perfect print and fit, I love it! The purge line got mixed up with the cap, (My bad) but I like it.

The designer has replied

@sipura

Thanks :)

@tsubus

Print Profile

1st 0.2mm layer, 2 walls, 13% infill

printed perfectly, very nice and sturdy

The designer has replied

@sipura

nice, thank you :)

@makingwithmogel

Print Profile

1st 0.2mm layer, 2 walls, 13% infill

Beautiful model, great tolerances and satisfying design! Thanks so much for sharing

The designer has replied

@sipura

Thank you for sharing a photo with us :D

@theKurmudgeon

print was awesome. going to do the bigger ones. didn’t have hardware to fit yet but had these roll pins. works like a charm for now.

The designer has replied

@sipura

nice, thanks :)

@oliver3D

Print Profile

1st 0.2mm layer, 2 walls, 13% infill

came out fine. printed in PETG. Thx for sharing.

The designer has replied

@sipura

Thank you :)

@TygerStyles

Print Profile

1st 0.2mm layer, 2 walls, 13% infill

Probably one of my favorite little cases I have yet to print, Love the ability to change the interior boxes based on your needs and the interior box with the sliding top is perfect. Definitely my favorite option. I added some cool stickers to this to deck it out and its truly a cool piece that people always ask me about.