Turn your drill or impact driver into a small blower!
All you need is a 1/2, 3/8 or 1/4 inch adapter (1/2 recommended)

Usage examples:
- Blow off dust
- Dry surfaces or materials
- Disperse fumes or odors
- Feed oxygen to your campfire

Durability tip: Stopping the drill abruptly at high speed is hard on the fan. Try to release the trigger progressively instead of all at once.

** Warning: Use with caution. Never insert fingers between the blades while the fan is connected to the drill and the battery is on. Also, the hole for the adapter features a ball detent recess to securely clip the adapter in place. However, if the drill is set to reverse, there is a risk of the fan flying off, which could cause harm.

Print settings:

Supports : It won't hurt but in my case it was not necessary
Orientation : Adapter hole facing up
Material : PLA
Infill : at least 25%
Layer height: 0.2