Great little benchy to test on a new printer.

Quick, easy print.

Printed great. Made a tiny print and then a larger one to test different supports.

Fun model to print. Printed using Resin2FDM and the FDG profile with a .2mm nozzle. I could have done a better job removing the supports but once I prime and paint it I feel like a lot of the visual issues will go away.

Great model, has incredible detail. Used a .4mm nozzle and PLA. Attempted a few prints in ASA but I couldn't get the infill to print for the base. I'm new to the hobby, so it's probably something I did wrong, but the infill for the base seems different than the infill for the rest of the model and that is where the failures kept happening with ASA. The PLA model that was successful had an issue with the supports for the left arm and gave out, but the break was clean and I was able to reconnect it using glue. Outside of that the rest of the supports worked well and I was able to remove them all with minimal issues, just took my time and went slow. used the base profile supplied by Galactic Armory.

Fun model to print! Printed in black ASA to test smoothing out layer lines using acetone. New to the hobby. .4mm nozzle used to print with base profile provided.

Great model to print! .4mm nozzle.

Using this model to test settings using Fat Dragon Games profile and Resin2FDM resin support system from Painted4Combat. In the photo with three miniatures 1st is with a .4mm nozzle, the 2nd is with a .2mm nozzle and no supports, and the last is with a .2mm nozzle and auto supports. The other image is of the Resin2FDM support system. I'm new to the hobby so I did a poor job removing the supports on the .2mm nozzle.

Excellent print, went flawlessly.

printed great. no issues!