Enabled support on the plate only to prevent TPU 95a from lifting.

These are great. I had bought some of the same design and liked them. Now I can print more when I need and the non-stress part works well for "flush to print object" as the color changes are mirrored.

Printed in Sunlu PETG Grey with Strength setting as a priority. There is much flex in this particular PETG. It broke in the first 5 minutes of use upon collision with several subterranean pebbles. I have printed again with 110% scale and an additional 5% in the Z direction. It still flexes and threatens to stress and break but it made it through one round of tough weeding in my garden box. If you are weeding in dry rocky soil, the user should consider scaling for added strength.

Printed in eSun PLA+. I printed in both tree and normal supports and had issues with ship pegs breaking off when there is a peg hole immediately above the peg leg. Plastic hardware in PLA was fragile. Plastic hinge pins were a tight fit and some broke due to the force required to install. It might be worth adjusting holes to use straight filament as hinge pins. The gameplay is overall functional despite the tolerance issues and fragility in PLA. I realize that this is mostly an adaptation of the game posted elsewhere and there were possibly only plate modifications when adding to makerworld.