Kakashi Hatake from Naruto Hueforge

This Hueforge is a 3D printed model of Kakashi Hatake from Naruto, with his iconic Sharingan. The red color accent enhances the overall look and gives it a more dynamic feel. Please disregard any warnings about floating regions during slicing. I'm eager to hear your thoughts on this piece.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to Red
    At layer #20 (1.68mm) swap to Jade White for the rest.