Dyson V10 - Filter rinsing insert - Free 3D Print Model

Search models, users, collections, and posts

Engineer

Tools>Other Tools

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Recommended: 0.16mm layer, 3 walls, no support needed

Designer

3.5 h

1 plate

4.3(21)

Open in Bambu Studio

Boost

120

382

365

198

Released

Description

Content has been automatically translated.

Show original

Welcome, designers and makers! I have designed a filter rinsing insert for the Dyson V10 vacuum cleaner

I conducted several design iterations, but remained unsatisfied due to suboptimal rinsing performance

This filter cleaning insert utilizes multiple small nozzle holes and seamlessly integrates with connection sets, such as the “Gardena Profi hose connection,” via a simple click system

The filter flushing insert prints readily on a variety of 3D printers and requires no support structure

I recommend PLA filament, though other rigid filaments should prove equally effective

For Dyson V12 owners, I have already released a compatible cleaning insert:

https://makerworld.com/en/models/987702#profileId-962668

Willkommen Designer und Maker Ich habe einen Filter Spüleinsatz für den Dyson V10 Staubsauber entworfen

Ich habe einige Tests mit verschiedenen Designs gemacht, war aber nie 100%ig zufrieden aufgrund der geringen Spülleistung

Dieser Filter Reinigungseinsatz arbeitet mit mehreren kleinen Düsenlöchern und kann via Klicksystem einfach an eine Anschlussgarnitur, wie den "Gardena Profi Schlauchanschluss", montiert werden

Der Filter Spüleinsatz kann einfach auf unterschiedlichen 3D-Druckern gedruckt werden und benötigt keinerlei Stützstruktur

Ich empfehle, den Reinigungseinsatz mit PLA zu drucken, aber jedliche andere steife Filamente sollten ebenso perfekt funktionieren

Für diejenigen, welche einen Dyson V12 besitzen habe ich bereits einen Reinigungseinsatz veröffentlicht:

https://makerworld.com/en/models/987702#profileId-962668

filter rinsing insert

dyson v10 filter rinsing insert

dyson v10 filter cleaning insert

Comment & Rating (35)

@user_4098339597

Print Profile

Recommended: 0.16mm layer, 3 walls, no support needed

very clean helps with getting these filters clean.

The profile uploader has replied

@xEngineerx

Thank you. I´m very happy that you like the model. :-)

@bbianchi

Boosted

Super useful and clean!

@Affe_1989

Print Profile

Recommended: 0.16mm layer, 3 walls, no support needed

Perfekt 👌🏻

@user_2651061404

Print Profile

Recommended: 0.16mm layer, 3 walls, no support needed

Other Issues:Bad design! Impossible to take out from filter after rinse, gets stuck in gasket and destroys gasket when you have to force it out! Also a bit to long so you have to press and hold it down while rising. My dyson is a V10

@CrashedIceMatt

The fit on this is way too tight! I printed in PETG and got it to go into the filter but when taking it out I had to use so much force that it ripped the rubber gasket on the inside of the Dyson filter. Way to tight of a fit!

@inky

Same thing happened to me, it goes in easy but I had to use a vice and a lot of force to get it back out, it tore apart the rubber gasket. Wish I had read your comment first

@miniatur

same happened here

@bgoleno

same. impossible to remove. I had to trash a filter. thankfully I had spares

@user_3689751192

Print Profile

Recommended: 0.16mm layer, 3 walls, no support needed

@bbianchi

Boosted

This is amazing and something that may solve a problem and prevent me from needing a new filter. Out of curiosity, which o-ring are you using on this? I can't seem to find one in my scuba kit that quite fits.

The designer has replied

@xEngineerx

Hi @bbianchi I hope it will solve your problem. I used the o-ring of a "Gardena Faucet Connector". The measurements of the o-ring are: - Inner diameter: 11,5mm - Outer diameter: 16,5mm - Ring thickness: 2,5mm

(Edited)

@bbianchi

Boosted

Replying to @xEngineerx :

thank you!

@hatty919

Not for V10 as described

@miniatur

don't use this on OG filters!!! Due to the inner seal geometry it will get stuck and destroy the inner seal.

@mnoppert

The bottom part is to wide and it doesn't seat all the way. This is not suitable for the v10, but maybe v11.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.