Screw in leg kit mount kit for stow away table.
Print Profile(1)
Description
Make your own stow away table!
3 or 4 pieces can be used in conjunction with a suitably thick wood sheet and 25mm diameter wooden rods to create a table with legs than can be easily unscrewed and put away. Beech wood is the best choice IMO.
Use 0,2 mm layer height otherwise threads will jam or not screw in at all.
Modifier volumes have been added to ensure 100% infill in critical areas.
To attach the mount to the table top use 4mm screws or similar. To attach the legs to the screw in part use 3mm screws.
Best to make small pilot holes before screwing in to avoid cracking.
I used both Bambu Lab PETG and PLA-CF and it works great.
The screw in leg feature can also be used to adjust the leg length for stability on uneven surfaces.
Created in Autodesk Fusion
Suggestions welcome.
Happy Printing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)