Steath

cover

tempImageqFOc6U.jpg

tempImagepHlQCp.jpg

tempImager42AVL.jpg

tempImageMhe9y7.jpg

tempImageqA8dsC.jpg

plate_1.png

plate_2.png

2024-12-20_6d9719ed60b5f.jpg

tempImageSWbPgg.jpg

tempImagelrGJJx.jpg

tempImageIyOpnp.jpg

tempImagePGJqBJ.jpg

Added a brim for better bed adhesion on small parts and to help prevent some warping.

0.2mm layer, 2 walls, 15% infill PLA Parts

tempImageWYoVrH.jpg

tempImagecjOTE2.jpg

tempImagexLk1ZY.jpg

Changes to make printing slightly faster such as sped up print speeds which do not compromise on quality and changes to the infil and strength settings as this print needs to be spongy and soft to protect the ESCs inside&nbsp;&nbsp;I printed mine in ludicrous mode in the printer after it had printed the first couple of layers and this sped it up considerably and did not affect print quality. as these are larger prints and do not contain large overhangs printing speed for TPU ca be much faster than usual. like always use dry filament for best results.

0.2mm layer, 2 walls, 10% infill TPU parts

Credit for the box goes to TheSameNameTwice for the original file and Tommegg For the Fixed parameters version over on printables (https://www.printables.com/model/541235-parametric-box-v2-double-clasp/remixes) (https://www.printables.com/model/1104003-parametric-box-v2-double-clasp-fixed-parameters)&nbsp;Print the Inserts in TPU so they are flexible and protective towards sensitive components. Print the rest of the box in PLA or PETG (print profile for PLA)&nbsp;Needs x16 2mm hex screws for assembly of hinges and clasps

Storage Box For ESCs (FPV) 

ASIA

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models