Zip Tie Holder Free Standing
Print Profile(1)
Description
See my other models in the links below the description.
Free Standing Zip Tie Holder. The holder will free stand without tipping over.
The holder was designed for 1" SDR PVC Pipe. Schedule 40 pipe will also work but SDR is thinner wall, lighter weight, and cheaper.
https://www.lowes.com/pd/Charlotte-Pipe-1-in-dia-x-10-ft-L-200-PSI-SDR-21-PVC-Pipe/1000080801
I also included tube STLs in 0.5" increments from 3.0" to 9.5" if you would prefer to print your tubes.
There is another model available with the French cleat here:
To Assemble:
- Cut pipe to length and deburr. I used 3.0", 6.0", and 8.5" for my zip ties
- Insert pipe into front most opening of the upper mount. This opening has a lip that will prevent the pipe from sliding completely through.
- Insert remaining 2 pipes into upper. These pipes will pass through the openings completely.
- Slip pipes around until the bottoms are both aligned with the front most pipe.
- Carefully slide all 3 pipes simultaneously into the bottom mount.
The pipes are snug fit and should not require glue to remain in place.
Check out my other collections:
- Tool Holders
- Parametric Storage Bins
- French Cleat and Hanging Boxes
- Skadis Hanging Accessories
- House and Shop Tools
- PPG Models
Boost Me (for free)
Here's my shameless plug for your boost rewards.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)