HighPriceForFreedom HueForge

AI image - source community public gallery.
Then used HueForge v0.8.0 to create the model.

Size 150x200mm. Do NOT adjust the thickness (Z) in your slicer! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

Nozzle: 0.4
You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm

These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.

Filaments Used:
PLA Elegoo+ Black Transmission Distance: 0.3
PLA Sunlu META Grey Transmission Distance: 8.1
PLA Devil design Dark Brown Transmission Distance: 0.6
PLA Elegoo+ White Transmission Distance: 8.9
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #15 (1.28mm) swap to Dark Brown
At layer #16 (1.36mm) swap to White for the rest.

Please share your prints.