Table Bowling Board Game (Table Bowling)

This table bowling game originates from a German children's game called “Tischkegeln”. The rules are rather simple, either use the ramp or the cannon and try to hit as many bowling pins as possible. How many shots each player has and how you give points is up to you. I designed this so you can easily store all items inside the board and close it off with a connector, so it fits easy with your other board games. To make sure it won't open, just put a rubber band around it.

Printing:

You can print this in a single color on two plates, or multicolor with an AMS on six plates. If you manually want to download the parts, the following need supports: Right Board on the Pins and Hole, Arm of the Ramp. Use Brims on the smaller, the taller objects, and the boards to minimize lifting.

Assembly:

Everything should be self-explanatory. Connect the boards, insert the clamp and either the ramp or cannon attachment. Then set up the Pins with the pin helper and play. If you have marbles you can use them with the ramp, for the cannon I advise to use the 3D printed balls, since they are lighter. This GIF might help you:

If you have any questions, just comment or pm me.

Commercial License available at the joint Patreon of @Kariprints3D and Me here: https://www.patreon.com/c/kariprints3d

Disclaimer:

Some models are fan art inspired by existing copyrighted works. You may only sell physical prints of these models if you have permission from the original copyright holder.