No-Sew Button - Replacement Pants Button - Free 3D Print Model

Search models, users, collections, and posts

pcwzrd13

Fashion>Other Fashion Models

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

PETG, 0.2mm layer, 2 walls, 15% infill

15 min

1 plate

4.9(32)

0.2mm layer, 2 walls, 15% infill

11 min

1 plate

5.0(15)

0.16mm layer, 3 walls, 15% infill

20 min

1 plate

5.0(5)

0.2mm layer, 2 walls, 15% infill

14 min

1 plate

4.7(3)

Open in Bambu Studio

Boost

219

556

729

559

Released

Description

Did the button on your pants pop off and you lack the sewing equipment and/or skills to sew it back on? Fear not for you can now print a replacement button that requires no sewing! It's a simple two-piece design with a screw-on fastener in the back. Simply punch a small hole (a pair of scissors worked well for me to make the hole) just large enough to push the fastener thread through and screw the button into place. It should stay pretty secure but feel free to use glue on the threads if desired.

Nothing special as far as printing is concerned. Just print both models as oriented. I used 3 walls and 15% infill.

Note that it holds up well in a cold water wash and through a dryer cycle with standard PLA but I haven't tested with hot water. This should be printable in resin as well but I haven't tried that.

Be sure to post your makes! If you like the design, please consider tipping on Ko-fi. Thank you! :-)