Corner Clamp Strong

Corner Clamp Strong

A very strong clamp design !!

Dimensions assembled [mm] 63 x 50,7 x 15  -  ! scale it as you want !

Layer height : 0,16 line width : 0,4

Walls 7; top 1,0mm ; bottom 0,6mm

Infill 25%

Print time P1S ~  1h 12min | A1 Mini ~ 1h 35min

Corner Clamp Strong BIG : https://makerworld.com/de/models/2011778-corner-clamp-strong-big#profileId-2167346

A different clamp design : G-Clamp deeper : https://makerworld.com/en/models/504560#profileId-420208

Here is a stronger version : https://makerworld.com/en/models/1068937-g-clamp-deeper-strong#profileId-1058457

Here is a bigger and higher version : https://makerworld.com/en/models/1512597-g-clamp-deeper-strong-big#profileId-1584083

Bambu Lab PLA Basic Bambu Green

Bambu Lab PLA Basic Orange

Bambu Lab PLA Basic Jade White

MakerWorld : https://makerworld.com/en/@sweb3791

My Models : https://www.printables.com/de/@CB_384764/models