ch340G USB to TTL Module Case - V2
Print Profile(2)
Description
Boost Me (for free)
Updated V2 on 2024.10.18:
Redrawn blueprints, replaced screw holes with snap connections, rounded corners for a smoother look, and modified numerous details.
The red version in the print settings is V1, which requires screws, while the yellow version is V2, which does not need screws. It is recommended to print the V2 version.
Housing for the USB-to-TTL module, gold edition, purchased from Taobao.
Used for this programmer:
Note: The model is a snug fit. Once the programmer is inserted into the housing, it will be stuck and cannot be removed. You can use a heated bed to soften the housing or directly use pliers to break the housing to remove the programmer. Do not force the USB port as this could damage the programmer!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)