Halloween Pumpkin Slinky Toy - Print in Place!
Print Profile(2)
Description
The Pumpkin, not a Slinky, looks like a pumpkin and works like a Slinky, but it is not a Slinky!
This design combines the festive charm of fall with the satisfying motion of a classic toy, but it’s definitely not your ordinary Slinky!
Whether you’re decorating for Halloween or simply want to enjoy the unique fidget factor while experiencing some childhood nostalgia, you'll want to print this model and try it for yourself!
Printing This Model
I have included a variety of sizes with differing tolerances. I recommend printing the medium -tighter tolerance version first.
If you have a Bambu Lab printer, use the Bambu Lab file. It includes all pumpkin and stem sizes. Select “Object” and Look at the file names on the right side of Bambu Studio to select the size you want.
Ignore all slicer warnings, they are expected due to the gap made to allow the not a slinky to not slink. Print at your own risk;)
I have experimented with both 0.4mm and 0.5mm tolerances (lower than that tended to fuse the plastic together) and both work. 0.5mm tends to print easier but may be less pretty looking, while 0.4 will require your printer tolerance to be a bit better but will look better.
| Pumpkin not a Slinky Size | Section Size (Bigger is stronger and faster to print, but it will have less slinkiness) | Tolerance Bigger = easier print but lower quality |
| Small | 3.2 | 0.5 |
| Small | 2.2 | 0.5 |
| Medium | 3.2, 2.2 | 0.5 |
| Medium - tighter (recommended) | 3.2, 2.2 | 0.4 |
| Large | 3.2, 2.2 | 0.5 |
| Large - tighter | 3.2, 2.2 | 0.4 |
Your Support is Appreciated!
If you like this model, please like it, leave a comment, boost the model, subscribe to my YouTube Channel, or leave me a tip! All support is appreciated! Please share your makes! I'd love to see them!
Selling Prints
This model is not for commercial use. Want to sell this model or any of my other models? Send me a message here and we can work something out!
Appreciation
Shout out to Make Anything for the original tutorial on creating these non-Slinkies and 3D Printy for the tutorial on creating a pumpkin in Fusion 360!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)