Glowing eyeballs

Glowing eyeballs for your pots! Give your plants or garden a fun and spooky Halloween touch.

Assembly is very easy, just put together the front and back parts of the eyeball with the stick in the middle as shown in the picture below.

You can place a battery light inside the eyeball or use glow-in-the-dark filament. I used small balloon lights that can be bought on Amazon or AliExpress.

Printing suggestions

• Supports are needed for eyeballs and sticks
• Use variable layer height for a nicer finish and fewer supports
• You can use PETG as the support interface for easier support removal

Short reel is available on my Instagram profile.

Original Design & Photography Disclaimer

All models published by NoOrdinaryLeaf are originally designed by us. We do not use AI for model generation or photo manipulation. Model files and photographs are the property of NoOrdinaryLeaf and may not be distributed or sold without permission.

Commercial Use

This model is only available for non-commercial use, you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license please visit our Patreon page: https://patreon.com/noordinaryleaf or subscribe to our Makerworld membership: