HueForge - Bondrewd "The Novel" - Made in Abyss

Hey, this is one of my first uploads, so please be kind to me ;D. Here's a manga panel of Bondrewd "The Novel" from Made in Abyss. The most important information is described below; if anything is missing, feel free to let me know. Enjoy!

The model can be scaled up, but only along the X and Y axes; the height must not be changed.

Please set the mode to Arachne in the Wall Generator for the best results. Makerworld didn't allow me to upload the print profile due to the longer slicing time. The preview image was printed with Arachne Mode active. Slicing takes relatively long the first time, but don't worry, the program doesn't freeze; the long slicing time is normal ;D

Print Details:

• Dimensions: 120mmx120mm
• Print Settings: 100% infill |layer height of 0.08mm | base layer of 0.16mm| Arachne Mode should be activated

Filaments Used:
PLA Extrudr Matte White Transmission Distance: 1.5
PLA Elegoo Basic Black Transmission Distance: 0.5
PLA Eryone Agate Grey Transmission Distance: 1.6
PLA Eryone Jade-White Transmission Distance: 9
This print uses 4 unique filaments

Swap Instructions:
Start with Matte White
At layer #6 (0.56mm) swap to Basic Black
At layer #11 (0.96mm) swap to Agate Grey
At layer #15 (1.28mm) swap to Jade-White for the rest.