Double Nasal Inhaler Eucalyptus or menthol - Free 3D Print Model

Search models, users, collections, and posts

Rene Czerner

Tools>Medical Tools

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

1.3 h

2 plates

4.5(2)

0.16mm layer, 2 walls, 15% infill

Designer

1.2 h

2 plates

4.0(1)

Open in Bambu Studio

Boost

Released

Description

Boost Me (for free)

If you like my project, press BOOST Me.
Thank you

Nasal Inhaler is a nasal aromatic stick with a cooling and refreshing effect. It helps keep the feeling of freshness in the nose.

Comment & Rating (6)

@Yotie

Print Profile

0.16mm layer, 2 walls, 15% infill

The print is alright however I noticed a major design flow after printing it: there's no vent holes so you cannot inhale anything that is inside. luckily I fixed it by drilling two holes at the bottom, they could be at the bottom of the nose bits too so it won't evaporate with the cap on

The profile uploader has replied

@SunSeaWolf

The concept of a ventilation hole in inhalation sticks is therefore nonsensical. These products are designed to concentrate the aroma and allow for its direct inhalation, not to disperse it into the surrounding environment. If an inhalation stick had a ventilation hole, it could actually reduce its effectiveness by dispersing the aroma into the surrounding environment instead of concentrating it for inhalation by the user.

@SunSeaWolf

The structure of inhalation sticks generally includes: 1. Outer casing: Usually plastic or metal, protecting the inner contents. 2. Inner filling: Contains a mixture of essential oils or other aromatic substances. 3. Porous material: Often cotton or another absorbent material that soaks up and gradually releases the aromatic substances. 4. Inhalation opening: A single opening at the end of the stick through which the user inhales the aroma.