Clip for COB LED Strip ALL SIZES - Free 3D Print Model

Search models, users, collections, and posts

BS 3DPrint

Tools>Organizers

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

All in one plate for tests

Designer

17 min

1 plate

5.0(5)

ALL SIZES DISTRIBUTED INTO DIFFERENT PLATES

Designer

55 min

6 plates

4.6(5)

A1M version

19 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

104

233

257

208

Released

Description

Starting from the SMD LED strip clips made of silicone, I have designed these clips for COB LED strips.

I recommend printing with transparent or translucent filament (PLA, PETG, TPU already tested) so that the light has less obstruction and is more hidden.

Also be careful with screwing. It is not necessary to be tight as much as possible, they could open the layers.

I use many of these almost daily and with 0.28mm they don't usually break but if they consider that they have to modify the layers... GO!

There are 2 models for each LED strip width: Normal and STRONG.

Some COB strip models have the highest silicone, for them there is XL version.

Remember: Having such a small surface you need to be careful with adhesion to the hot bed.

If you need clips for non-COB strips, such as IP20/30, IP65 or IP68, we have separate designs and different sizes:

For IP20/30 and IP65 strip

Comment & Rating (12)

@fisz

Print Profile

ALL SIZES DISTRIBUTED INTO DIFFERENT PLATES

they're great, thanks!

@user_112138789

Print Profile

ALL SIZES DISTRIBUTED INTO DIFFERENT PLATES

great model, but lower layer height would be better

@kevinlui

Print Profile

ALL SIZES DISTRIBUTED INTO DIFFERENT PLATES

These worked out really well for some under cabinet cob LEDs I just put in to replace our aging halogen fixtures. I only ended up using a handful of these but they worked out great. Printed in translucent PETG so it wasn't completely transparent but it did well enough! Careful tightening the fasters in, however. I used M3 screws for the 8mm profile and ended up splitting some of the pieces if I tightened too much. I would suggest drilling a pilot hole and then hand tightening. Anyways, great design! Thanks!

@user_46722827

Print Profile

All in one plate for tests

very good

@Colin810

Print Profile

ALL SIZES DISTRIBUTED INTO DIFFERENT PLATES

Prints very well all variants together in one file very good

Show original

@coolkidirish

Print Profile

All in one plate for tests

These are great, thank you

@NSBrad

Print Profile

All in one plate for tests

Printed in clear PLA and they look good on the light strip and don't affect the light much.

@JesusArrow

What size screw should we use when assembling ?

@sepp0815

Print Profile

All in one plate for tests

@Aaron.reed

Print Profile

All in one plate for tests

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Gridfinity Hex Bins all sizes

ostat

26.7 k

5 k

Gridfinity Simple Base - all sizes

Schmidsfeld

45.6 k

4.8 k

2.6 k

899