No Man's Sky Hueforge

Project: nms.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Paramount 3D Iron Red Transmission Distance: 3
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA PolyTerra Arctic Teal Transmission Distance: 0.5
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA Overture Matte White Transmission Distance: 3.7
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Iron Red
At layer #12 (1.04mm) swap to Marine Blue
At layer #16 (1.36mm) swap to Arctic Teal
At layer #18 (1.52mm) swap to Sunrise Orange
At layer #20 (1.68mm) swap to Savannah Yellow
At layer #21 (1.76mm) swap to White for the rest.