These also fit the Uline S-12413 bins like a glove.  My guess is that Akro Mills must make Uline branded bins because these appear to be the same exact bin.  Either way this divider model and the accompanying bins (https://makerworld.com/en/models/551029-upper-compartment-for-akro-mils-30210-bins) were perfect.  Thank you!

NW_TechDesign

DP design

cover

20240721_172645.jpg

akro_30219_bin_div_x2

plate_1.png

Akro S-12413 Bin Dividers (3).jpeg

Akro S-12413 Bin Dividers (5).jpeg

Single plate with one divider and one 2-compartment bin from (https://makerworld.com/en/models/551029-upper-compartment-for-akro-mils-30210-bins)<ul><li>0.2mm layer height</li><li>Bridge Direction 45 deg</li><li>PETG HF</li></ul>

2-compartment tray with 2-way Divider --> 0.2mm layer

akro_30210_bin_div_x4

Akro S-12413 Bin Dividers (6).jpeg

Akro S-12413 Bin Dividers (4).jpeg

Adding this print profile with dividers and bins to this model to save others some clicks. The designer has the dividers and bins separate, but I liked printing a bin and a divider on one plate.  Happy to edit if this isn&#39;t the best way to post these.&nbsp;Single plate with 4-way divider and one 4-compartment bin from (https://makerworld.com/en/models/551029-upper-compartment-for-akro-mils-30210-bins)<ul><li>0.2mm layer height</li><li>Bridge Direction 45 deg</li><li>PETG HF</li></ul>

4-compartment tray with 4-way Divider --> 0.2mm layer

4X and 2X dividers for Akro-Mils 30210 (30-210) bins.  Here are the upper bins shown in the photos:  <a target="_blank" href="https://makerworld.com/en/models/551029" rel="nofollow noopener">https://makerworld.com/en/models/551029</a>&nbsp;Note that the dividers have a bit of a wedge shape on the front and back edges to lock into the bins, so don&#39;t be tempted to print the 2X divider on its side.

Print Profile(2)

Description

Comment & Rating (1)

License

Related Models

Dividers for Akro-Mils 30210 bins

Print Profile(2)

Description

Comment & Rating (1)

License

Related Models