P1S X1C Temp/Humidity Sensor Bracket -Front Facing
Print Profile(1)
Description
Easy drop-in front-facing thermometer and hygrometer upgrade for the P1S or X1C. Monitor the chamber temperature and humidity inside your printer during prints.
This model is ideal if you have an AMS on top of your printer and can't easily see through the top glass. If you would like an angled bracket so you can see the temp/humidity through the top glass, please see my other model here:
Angled Bracket Version - https://makerworld.com/en/models/469325#profileId-378695
The bracket slides into the existing screw holes at the back/center of the print chamber (right of the waste filament chute). No printer modification or adhesives needed! No interference with the extruder or belts - plenty of clearance!
NOTES:
I recommend using PETG, ASA, or similar since they are more resistant to extended exposure to high temperatures - realistically PLA would probably be fine.
Leave supports on - they are minimal and are needed for the 2 base cylinders that insert into the holes at the back of the printer.
I used this particular model thermometer, but many are available in this form factor:
https://www.amazon.com/Veanic-Thermometer-Hygrometer-Temperature-Fahrenheit/dp/B07TRKGW9G?ref_=ast_sto_dp
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (65)