Oppenheimer

rint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 115.38x200.38mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Jade White
At layer #10 (0.88mm) swap to Orange
At layer #13 (1.12mm) swap to Yellow for the rest.