Car Fishing Rod Rack - Free 3D Print Model

Search models, users, collections, and posts

Jacob_Smith

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 2 walls, 15% infill

Designer

2.3 h

1 plate

4.6(58)

Optimized PETG Settings, Better Heat and Strength Resistance

2.3 h

1 plate

3.5(2)

Open in Bambu Studio

Boost

1011

2519

1.3 k

948

Released

Description

This is a headrest mounted fishing rod rack, it can hold up to 6 rods of up to probably 8-9 feet, although that depends on the size of your car. This rod holder makes transporting fishing rods easier and lowers the risk of broken tips. It prints very well at .12 mm layer height and works at .16 and .2 but may need some cleaning up. print with supports on only the 90 degree overhangs. It requires one medium size rubber band. It is able to fit almost all headrests that use 2 pins.

Comment & Rating (74)

@bg_makes

highly suggest using PETG, this low infill PLA profile will not hold up well. also adding 3D print oil allows the mechanism to slide much better.

@user_3499230239

Hi can you send me the ptg settings

@lowlyfe16

just use more infill or less infill and add more walls

@bg_makes

Replying to @lowlyfe16 :

not how that works when PLA warps in a hot car. ABS would be even more ideal

@user_2409599234

fits well with me. now to try how long will it last when temperature turns +40°C during summer here in Australia.

@Centurion3D

Print Profile

0.12mm layer, 2 walls, 15% infill

Works great after you add some oil, maybe WD40 would work. Would you allow us to upload a PETG profile? I have one for easy removal of supports for PETG!

GIF

@bjturcotte

Print Profile

0.12mm layer, 2 walls, 15% infill

These turned out very well! I printed two options for a friend to try out, PETG Trasparent and ABS-GF.

@DrogerT

Print Profile

0.12mm layer, 2 walls, 15% infill

looks great! my brother will be pleased.

@user_3214202506

Print Profile

0.12mm layer, 2 walls, 15% infill

it printed awesome in PLA and thank you so much. I’m putting this in my car and I’m leaving it there.

@Oldesalty

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

Beginner at 3D printing, but I've been looking for something like this to protect my rods (and passengers!) for a while. Thanks very much! I did change the material to PETG and added a couple notches in the rod holder piece for a rubber band or small bungee to hold the rod tips in place on rougher roads.

@Gribor

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

muy útil

@Daniel.Designs

Print Profile

0.12mm layer, 2 walls, 15% infill

Great print very well designed.

@user_1380974888

Print Profile

0.12mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.