Card coin holder (for e.g. Lockcard Wallet) - Free 3D Print Model

Search models, users, collections, and posts

E-Buddies

Fashion>Other Fashion Models

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 15% infill

Designer

39 min

1 plate

4.7(61)

0.08mm layer, 2 walls, 15% infill

Designer

39 min

1 plate

4.8(12)

A1Mini 0.16mm layer, 2 walls, 15% infill

25 min

1 plate

4.9(11)

Open in Bambu Studio

Boost

204

628

866

669

Released

Description

I didn't like other solutions where I could combine banknotes and coins. It is noisy and annoying to get the coins out of the tray.

So I found an already nice solution from mirabatek but I had difficulties pulling it out of the wallet. So I've created my own with a nice round fillet at the back and flat front for a clean and nice finish. I recommend using a good sliding material like PLA-Metal, which I've used to easily pull out the card without pulling out other cards.

I was inspired by mirabatek but did not use his STL and created my version.

https://makerworld.com/en/models/126202#profileId-136348

Update:

I've made 2nd version with a second hole to pull the card from the bottom as well.

Comment & Rating (97)

@walker73

Print Profile

0.08mm layer, 2 walls, 15% infill

Useful, I would suggest an even slightly reduced thickness

The profile uploader has replied

Show original

@Ebuddies

thanks for your feedback. I can not do it thinner then the coins will scratch the metal case too much

@user_1889074236

https://makerworld.com/en/models/2711559-card-coin-holder-for-leather-fabric-wallets

@eiskreuz

Boosted

Print Profile

0.08mm layer, 2 walls, 15% infill

Works fine, thx.

@Steinherkules

Boosted

Print Profile

0.08mm layer, 2 walls, 15% infill

nice

@druckstelle

Print Profile

0.08mm layer, 2 walls, 15% infill

Highly practical for a slim wallet without a coin pocket, thank you

Show original

@Arilopesc7

Print Profile

0.08mm layer, 2 walls, 15% infill

It fits perfectly

Show original

@GrimPeeves

Print Profile

0.08mm layer, 2 walls, 15% infill

I had some issues with ironing on matte black. But the design works. Also inspired me to design something different for coins so 5/5!

@Mo.3D.Lab

Boosted

Print Profile

0.08mm layer, 2 walls, 15% infill

I printed in PETG-HF and it came out good. Used it for a Month now an it didn’t let me down. Exactly what I needed! Thanks!

@Maker_space_3D

Print Profile

0.08mm layer, 2 walls, 15% infill

The coins fit perfectly, very useful in my case because I use small wallets and never have space to put coins Also because they are not used very often, but in case of need it is very useful to have them

Show original

@user_3330537290

Nice model, the print went through without any problems. Visually great! However, the tolerance for the coin slots is very low. The coins fit so tightly for me that you almost have to press them in. If you prefer it loose, you should possibly enlarge the model slightly in the slicer (XY scaling). Otherwise, top job!