Print Cam Mount (Hinges)

I originally had a cam mounted on the frame before i converted my P1P to a P1S, with the door and enclosure this was no longer possible.

So, i came up with this solution.

There is a version 2 available HERE.

It's a little taller so that the first layers are better visible.

It uses the two M3 holes of the hinges on the top of the glass door.

It's made to fit a DLINK DCS-8350LH or the slighty cheaper version DCS-6100LH.

Included the .step files and here is the OnShape link so you can make it fit what ever camera you want.

To fit this to the printer, you need 2x M3x8mm and 2 M3 washers.

In order to not make the model thicker than nececary the 2 washers are needed to make the screws the right length.

If you have M3x5 mm washers may not be necessary.

Should be able to print without supports, however i chose to print with supports in order to make the holes as round as possible.