Cyber Owl - Free 3D Print Model

Search models, users, collections, and posts

the_bearded_jedi

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

4.4 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Elegoo Blue Transmission Distance: 2.7
PLA Paramount 3D Mid Century Teal Transmission Distance: 2
PLA PolyLite Pro Magenta Transmission Distance: 1
PLA Bambu Purple Transmission Distance: 1.4
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA Overture Matte White Transmission Distance: 3.7
This print uses 7 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #11 (0.96mm) swap to Mid Century Teal
At layer #14 (1.2mm) swap to Magenta
At layer #15 (1.28mm) swap to Purple
At layer #17 (1.44mm) swap to Savannah Yellow
At layer #19 (1.6mm) swap to White for the rest.

If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation or join my patreon for early access and request priority prints.

https://www.patreon.com/sblayeredcreations

owl

cyberowl

hueforge

Comment & Rating (2)

@h1ckman

Print Profile

0.08mm layer, 2 walls, 100% infill

i really like this. the black was too much for my other colors so i made another one. the second one i swapped out black with dark grey and blue with a light blue. thanks for making.