DJI OSMO Pocket 3 Hard Case with AirTag Slot

Please support our work by rating our models, this helps immensely to keep providing free parts for the community!

For more specialised filmmaking and photography parts, visit 3dfilmparts.com where we ship ready to use parts worldwide. 

Find all my products at my online store here

https://www.3dfilmparts.com/

TrippyPrints3 has a great video showcasing the print process below:

DJI OSMO Pocket 3 Hard Case with custom insert.

***I have added an insert that accommodates 2 x MIC 2's and micro SD cards***

You can print this case and change up the insert down the track as I have created a nice tolerance to keep the insert fixed, but still be able to pull it out.

You will need 6 x M3 30mm screws/bolts. 4 x 3-4mm flat top small screws to fasten the lid organiser (but thats not required as its a snug fit).

The seal should be printed in TPU.

Use your choice of foam to stick or push into the lid with a wide brim screw head.

There is an optional lid organiser net that should be printed in TPU to get your fingers behind it to store some other cables etc.

I have a hard lid organiser also for velcro to secure a small velcro pouch which you can find on aliexpress or amazon easily.

There is a slot for an AirTag to be placed in the backend on the insert also :)

All plates are labelled with what there are. Print each part separately as I have in the 3MF for the best results using a slow setting.

Open to ideas if there are other insert configurations, please checkout my instagram for more custom case designs.

Please support our work by rating our models, this helps immensely to keep providing free parts for the community!

For more specialised filmmaking and photography parts, visit 3dfilmparts.com where we ship ready to use parts worldwide.