Hnas Enclosure, Mini NAS Enclosure, Hnas Enclosure, Old Hu Hnas

Old Hu Hnas, a compact and petite NAS enclosure.

Enclosure Introduction:

1. Ultra-miniature Size: 121mm wide x 146mm high x 162mm deep

2. Supports 7 2.5-inch hard drives, including 15mm thick drives. 5 are drawer-type, and 2 are fixed internally.

3. The motherboard uses Changwang's X86 P5 N100.

4. The hard drive back panel uses the Hnas-specific back panel from Xianyu user "Wankecustom."

5. Both the motherboard and hard drives have heat dissipation, with excellent thermal performance.

Printing Notes:

1. It is recommended to use high-temperature-resistant materials such as ABS for printing, use PLA and PETG with caution, as there is a risk of melting.

2. Print one hard drive bracket first, test it with the hard drive cage, adjust the XY compensation or flow rate, and then print the rest.

3. The motherboard compartment and back cover can be adjusted slightly in terms of XY outer contour compensation and hole compensation to match the enclosure and hard drive cage.

The BOM table is in the last two images. Please note that when purchasing the motherboard, you need to buy two SATA cables and a fan cable (the table has notes). In addition, two 4010 fans in the motherboard compartment need a 1-to-2 fan cable (not marked in the table, so it is specifically stated).