Print Profile(1)
Description
If using my 3mf files to print either raise the bed temp in the filament settings to around 50c or just add a brim because you can see in the one picture that the print was starting to pull away from the plate. It did finish alright, but just a heads up.
Anyway, I have been working with https://www.instagram.com/stitchyvirgil/in creating a boo patch design to be ironed on clothing, a shirt, jacket, or other. He has a post about it, if you check his Instagram. I just ordered some patches myself at….
You may have to left click and translate to English as he is Dutch
Use this discount code at checkout for 20% off
Planpa3d(BOO)
I had some SVG’s of a picture of my boo design I recently adapted and thought I should share them with you. Check out my post to see the original pause at layer height print. https://www.instagram.com/p/Cdtn5o4OzVw/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
I included a couple of different versions, but the only one I had time to print was the MMU color at bottom. There is a Version you can print with a single extruder printer, just need to add a pause at layer height and change the color of the filament. Start with Pink, then Black, Then Gray, then finally white.
I recommend printing these as large as possible, as there are some thin areas in the SVG’s that won’t print out so nice when scaled down.
I have the Fusion 360 files on posted to Patreon if you are interested in changing or adapting the design.
You can follow me on instagram,
https://www.instagram.com/pla.n.pa/
to find out what I designs I am currently working on.
If your interested in selling prints of my designs, become a Patreon supporter here…
https://patreon.com/planpa3d
License
Comment & Rating (3)