Xgimi MoGo 2 Pro Stand - Free 3D Print Model

Search models, users, collections, and posts

PandoranResearcher

Household>Office

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.4 h

1 plate

4.0(4)

Open in Bambu Studio

Boost

106

Released

Description

This is a stand for projector XGIMI MoGo 2 Pro.
For the screw you will need a M7 screw with a lenght of 5cm minimum and an M7 nut

to fix the projector, a camera screw is needed, I use this one : https://www.amazon.fr/dp/B0748CQ4RK?ref=ppx_pop_mob_ap_share

I hope you enjoy it !

Comment & Rating (20)

@gluigicocco

Boosted

Thanks!!! I printed the first part with standard settings, while the top part with 40% infill and a 'Rectilinear' pattern

(Edited)

The designer has replied

Show original

@user_213225543

no problem enjoy !

@gluigicocco

Boosted

Replying to @user_213225543 :

Can you link me the M7 screw you use? because it's not a normal bolt

Show original

@user_213225543

Replying to @gluigicocco :

I don't precisely remember that screw but it's something like that

Show original

@f3r_

Works pretty well. Just have in mind that if you print it with PLA, the material is a bit flexible so the weight of the projector slightly bents the horizontal part of the top piece, making the projector not being leveled. I've printed both pieces at 20% infill, so maybe using a higher infill could fix that. I would suggest 50% or more (at least for the top piece).

The designer has replied