Battery slide 18650 - Free 3D Print Model

Search models, users, collections, and posts

SaVo3D

Hobby & DIY>Electronics

IP Report

Print Profile(3)

All

P1P

H2S

X1E

H2D

P1S

X1 Carbon

H2C

H2D Pro

P2S

X2D

A2L

A1 mini

original - flat top 18650

Designer

2.9 h

1 plate

4.8(49)

Button top 18650 Batterys

Designer

2.1 h

1 plate

4.8(11)

Flat Top(A1 mini, 10 cells) 0.2mm layer, 2 walls, 15% infill

3.1 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

194

416

146

809

379

Released

Description

Battery slide for ten 18650 batterys!

Theoriginal model is designed for flat top 18650! If you have button top 18650, look beneath!

This is a flat top 18650. If you have those, you can use the original print profile.

This is a button top 18650. If you have those, you need to use the print profile “button top” because these batterys are slightly longer

Have a look at my other models here: SaVo3D | Home - MakerWorld

Boost Me (for free)

If you liked the model and found it helpful, I’d really appreciate it if you could give it a boost! It makes my day and helps make up for the time I spent making sure you had a great printing experience. Thanks a lot in advance!

Membership

Do you want to sell physical prints of my models? Join my commercial license program!

Join

Bambu Lab Textured PEI Plate Cleaning Guide | Bambu Lab Wiki

Comment & Rating (146)

@I_uckyI_uke

Print Profile

original - flat top 18650

The print was satisfactory but could benefit from slightly more play, as my batteries would not slide under the bow without assistance

The profile uploader has replied

Show original

@SaVo3D

Did you read the description

Show original

@I_uckyI_uke

Replying to @SaVo3D :

If you're implying that I have ones with protruding button cells, then I can only say that I only have flat 18650 batteries without a protruding button If you always intend to upscale your standard print profile then, sorry:D

Show original

@SaVo3D

Replying to @I_uckyI_uke :

No, the description mentions that some users complained about the fit, just like you did, and that's why I recommend scaling the model by 3-5%. And all that in red, at the very top ☝️ 😉 My batteries all fit in the standard model; I have LG HG2, Samsung Q30, and various other models

Show original

@jr1979

Print Profile

original - flat top 18650

just FYI, this is a great battery organizer for 18650, but remember these only work for flat top 18650. Button top18650 do not fit. If the owner of the file can make a larger one that accommodates button tops this would be fantastic since I have a mix collection of 18650's.

The profile uploader has replied

@SaVo3D

First thank you for your rating. Are you aware, that you can scale the model in bambu studio? You can simply scale the model a wee bit up in the direction you want. Just untick the box, so you scale just one direction.

(Edited)

@SaVo3D

Look at this picture. Just go to bambu studio, load the model into the slicer and click the model on so it is marked, then click on "scale". Now untick the box "uniform scale", now scale the x direction to your desired measurement. This way your batterys will fit like a glove :-). Just let me know if you need further help!

(Edited)

@jr1979

thank you, I will do that!!

(Edited)

@TheTechKid1

Boosted

Print Profile

original - flat top 18650

holds 18650s perfectly

The profile uploader has replied

@SaVo3D

thank you kindly

@user_2874271406

13 pieces

The designer has replied

Show original

@SaVo3D

would you mind to rate the model?

@HealingBear

Print Profile

Button top 18650 Batterys

Nice little print I wanted to make my 18650s a little more accessible and I have both flat top and button top batteries your prints come in very handy. They both printed excellent thank you for your time and effort and designing these prints.

The profile uploader has replied

@SaVo3D

thank you kindly 😊

@HealingBear

Print Profile

original - flat top 18650

Nice little print I wanted to make my 18 650s a little more accessible and I have both flat top and button top batteries your prints come in very handy. They both printed excellent thank you for your time and effort and designing these prints.

The profile uploader has replied

@SaVo3D

thank you kindly 😊

(Edited)

@DB69

although it printed well it unfortunately doesn't fit a shame Addendum bent it a little now it works

(Edited)

The designer has replied

Show original

@SaVo3D

The description says in big red letters to scale up 3-5%. You also have button top batteries... please read the description, thank you

Show original

@DB69

Replying to @SaVo3D :

Thanks I'm a beginner and couldn't find the scaling in Handy 😁

Show original

@Thorgraum

very nice. printed button top at 110 103 103% loose and nice fit. perfect for various battey sizes and to force even cell rotation by havint one for "needs charging" and one for "full" cells