Logitech shifter mount for Playseat Challenge X

Logitech shifter mount for Playseat Challange X

This is a bracket that mounts on two points of the Playseat Challange X sim rig seat.

Super rigid, brings the shifter position closer for more ergo, the shifter mounts with the default two bolts on the bottom plate+ the two gripping teeth. One goes lower a bit gripping the inside part, other one bit higher gripping on the outside.

It has bunch of supports but if anyone finds a better way to print this let me know or feel free to upload a print profile.

Strong supports are needed as they are set in the print profile, otherwise supports could de-attach. 

Should work with G29 ,G920 ,G923 ,G27 ,G25 shifters. Only tested on G920 shifter, but others listed should have the same mounting.

The uploaded model is for right hand side. Can be mirrored for left side as well,mounting is the same there.

Hardware to mount it:

m5 30 x4
m5 nut x4
m8 30 x1